Page 13 - Colorado

RENDERS RENDERS

POWDER RENDERS PASTY RENDERS

ENDUILFEX: ANTI HUMIDITY RENDER ADESIVA : FILLING RENDER

Definition : Enduiflex is a powder coated for moisture - certified W3 treatment. It leaves the surface to breathe and Definition : Adesiva is a light, very white, pasty filler. It is used to fill in holes or cracks of 1 mm to 3 cm. In one
can be covered by any coating or paint finish. It equalizes recorks surfaces and holes up to 1cm thick. single coat you can achieve a smooth surface without any defects. It has easy application properties and does not
require any retouch or finishing.
Technical characteristics: Technical characteristics :
Renders Destination : Interior and exterior Destination : Interior and Exterior Renders
Dilution
: Matt
Aspect
: Ready to use
Dilution : Water (upto 30%) Colour : White
Colour : White Drying : 1 hour / 3 cm at 25°C
Packaging
: 0.5 L - 1 L
Drying : 24 hours Tools : Trowel or spatula
Spreading-rate : 1.5 sqm/kg Storage : One year in the closed paint can, as delivered
Packaging : 5 kg
COLOSTOP
Application tools : Coating knife COLENDUIT EXTRA
Storage : One year in the closed plastic bag, as delivered
Definition : Colostop is a water-based render based upon a vinyl emulsion. It is designed for retouching and finishing work
on interior masonry leaving a smooth, uniform finish. It protects against surface alkalinity with fresh cement
ENDUIT FAÇADE P20 Technical characteristics :
Destination : Interior
Definition : Enduit Façade P20 is a water-based render based upon a vinyl emulsion and controlled particle size Dilution : Ready to use
extenders. It is designed for retouching and finishing work on exterior masonry leaving a smooth, uniform finish. Drying :1 hour - Recoatable : 12 hours
Technical characteristics : Spreading-rate : 1st coat : 2 to 3 sqm/kg - 2nd coat : 6 to 8 sqm/kg
Packaging : 1Kg - 5 kg - 30 kg
Destination : Exterior Tools : Trowel
Dilution : Water (20 to 25%) Storage : One year in the closed paint can, as delivered
Colour : White
Drying : 12 hours - Recoatable : after 24 hours SUPER PATENDUIT SP88
Spreading-rate : 0,5 to 1 sqm/Kg depending charge
Packaging : 10 kg - 25 kg Definition : Super Patenduit SP88 is a water-based render based upon a vinyl emulsion for interior. It can be
Tools : Trowel applied over all the typical surfaces: cement, plaster and wood.
Storage : One year in the closed plastic bag, as delivered Technical characteristics:
Destination : Interior
SILENDUIT V805 Dilution : Water (upto 10%)
Colour : Grey - Pasty
Definition : Silenduit is a water-based render based upon a vinyl emulsion. Designed for retouching and finishing work Drying : 30 min
leaving a smooth, uniform finish. Spreading-rate : As a render : 2 to 3 sqm/kg – When repairing : 3 to 4 sqm/kg
Packaging : 5 kg - 25 kg
Technical characteristics : Tools : Coating knife
Storage : One year in the closed plastic bag, as delivered
Destination : Interior
Dilution : Water (20 à 30%)
Drying : 1 hour - Recoatable : after 24 hours COLENDUIT
Spreading-rate : As a render : 2 to 3 sqm/kg Definition : Colenduit is a water-based render based upon a vinyl emulsion. It is designed for retouching and
When repairing 3 to 4 sqm/kg covering surface irregularities, and it protects against surface alkalinity with fresh cement. Colenduit can be applied
over all the typical surfaces: cement, fibre cement, plaster board, plaster and wood.
Packaging : 5 kg - 25 kg
Tools : Trowel Technical characteristics :
Storage : One year in the closed plastic bag, as delivered Destination : Interior
Dilution : Ready to use
Colour : White
COLENDUIT EXTRA B505 Drying : 1 hour
Spreading-rate : As a render : 2 to 3 sqm/kg - When repairing : 3 to 4 sqm/kg
Packaging : 5 kg - 25 kg - 30 kg
Definition : Colenduit extra B505 is designed for use as a smooth render over plaster and cement on interior walls Tools : Trowel
and ceilings. It has easy application properties and good adhesion. It gives a very smooth, white, low absorbing Storage : One year in the closed plastic bag, as delivered
premium finish before painting.
ENDUIT CERAMICA : RENDER FOR CERAMIC
Technical characteristics :
Definition : Ceramica tile coating is a pasty render used for the preparation and smoothing of all interior and
Destination : Interior exterior supports (tiles, earthenware and old painted surfaces). It gives a smooth appearance and provides excellent
Aspect : Matt adhesion for top coats.
Dilution : Water (20 to 30%) Technical characteristics:
Colour : White
Drying : 5 hours - Recoatable : after 5 hours Destination : Interior
: Ready to use
Dilution
Spreading-rate : 2 to 3 sqm/kg) Aspect : Mat
Packaging : 5 kg - 25 kg Drying : 6 hours - Recoatable: 24 hours
Tools : Rendering knife, Trowel Spreading-rate : 3 to 4 (depending upon the support irregularity)
: 5 kg
Packaging
Storage : One year in the closed paint can, as delivered Application tools : Coating knife - Trowel
12 13